[…] ratings. Fiberglass bridge/grid ha nger-type suppor ts are recom- mended. If suppor t contains less than 1200 of contact, a split fiberglass pipe p rotective sleeve or fiberglass wear pad shall be installed and bonded to the pipe. Split sleeve length shall equ al pipe diameter. This does not apply […]
[…] thread entrances. Special adapters for PVC-coated fittings are also available with tapered threads and a straight shoulder so that they can fit under the PVC sleeve of a PVC-coated steel fitting. What sizes of male adapters are available? Champion Fiberglass male adapters are available with or without a gasket in […]
[…] conduit PPE guidelines detailed below. To prevent accidents, ensure that you have the following PPE on hand to protect skin, hands, eyes, and lungs: Long- sleeved clothing, such as a long-sleeve shirt Gloves Safety glasses Particulate mask (N95) Tools To Facilitate Cutting Field cuts can be made with the following […]
The Champion Duct® Joining System includes the interference joint, straight socket, gasket joint (triple seal), and tight lock joint plus adhesive and various sleeve couplings and adapters. To estimate the number of joints and adhesive cartridges necessary for your project, see our Epoxy Adhesive Calculator. For information on which joints to use […]
[…] and get more details. The Champion Duct® Joining System includes the Interference Joint, Straight Socket, Gasket Joint (Triple Seal), And Tight Lock Joint plus various sleeve couplings and adapters. For information on which joints to use by application, and National Electrical Code (NEC) guidelines, visit our catalog. Champion Fiberglass can advise […]
[…] flap wheel sander or a grinder with an abrasive sanding disc. Recommended grit is 60-grit emery. Proper field cutting and sanding PPE to include: Long sleeve clothing Gloves Safety glasses Particulate respirator (N95 or equivalent) Calculator Use the Champion Fiberglass Conduit Calculator to compare the installation and material costs of […]
[…] Champion Fiberglass Xpress Utility Risers shown with 45° and 90° elbow bends. Additional sizes are available. Xpress Utility Risers are provided with a standard PVC sleeve coupling and PVC male adapter transitions. Alternate transitions available include: Straight PVC Deep Socket Coupling Male Adapters (PVC or fiberglass) Female Adapters (PVC or […]
Champion Duct® elbows offer light weight, low coefficient of friction and no burn-through. Champion Fiberglass® helps contractors and engineers reach successful project outcomes with speedy installation and low material and installation costs. Get no burn-through fiberglass elbows fast as we’re now shipping elbows within 48 hours to customers. When last-minute needs arise, Champion Fiberglass is here to deliver.
[…] Risers the right choice! Xpress Utility Risers orders can ship in 48 hours or less! Our Xpress Utility Risers are provided with a standard PVC sleeve coupling and PVC male adapter transitions. Alternate transitions (as shown below) and lengths are available but may alter the lead times. 6400 Spring Stuebner […]
[…] (for trapeze hanging) with necessary hardware. Sometimes stainless steel threaded rod is used instead, especially where chlorine (incl. salt) can be present 1″ fiberglass tubing, sleeved on the outside of the threaded rod Steel hangers shall never be used in combination with fiberglass conduit. The hangers are offered in two […]
