calc-icon calc-icon
Find a Rep
Videos
mobile-icon Contact
calc-icon Savings Calculator
Find a Rep

Champion Epoxy Adhesive

The Champion Epoxy Adhesive system is a two-part adhesive (1-to-1 mix ratio), epoxy resin system, designed to permanently bond fittings and joints of fiberglass reinforced epoxy conduit. It is also designed for use with pultruded polyester and vinyl ester components. Each cartridge system contains resin, hardener and one plastic static mixer. An adhesive gun and mixing tip is required for applying the adhesive (ordered separately). If a faster setting adhesive is desired, there is a Champion Mix® adhesive available that gels much faster. The “Fast Gel” adhesive can be specified by adding the suffix “-FG” to the item numbers. Because the “Fast Gel” adhesive sets up quicker, additional mixing tubes may be required. The epoxy adhesive is available in two convenient dispensing tube sizes: 250 ML and 600 ML (2 – 300 ML tubes side-by-side). The CM-250 & CM-250-FG adhesive tubes utilize a high ratio standard caulk gun that can be purchased at any local retail store.

Adhesive Gun

Champion Fiberglass adhesive guns are only available for the 600 ML adhesive tube sizes. The 250 ML adhesive size utilizes a high ratio standard caulk gun that can be purchased at any local retail store.

Champion Epoxy Adhesive
Advantages

Champion Epoxy Adhesive offers the following benefits:

Air-freight icon
Champion Epoxy Adhesive Features:
  • This Champion Mix adhesive is NOT considered a ”Dangerous Good” or hazardous material, so it can be shipped VIA air freight if required.

DATA SHEETS

SDS CF Part A Adhesive, Fast Gel
SDS CF Part B Adhesive, Fast Gel
SDS CF Part A Adhesive
SDS CF Part B Adhesive
Adhesive Flyer Cover
Adhesive Flyer

Champion Epoxy Adhesive
Instructions

Learn how to join fiberglass conduit to fiberglass as well as PVC 40 and 80 conduit.

Champion Fiberglass® adhesive includes an adhesive tube and a static mixer tip. Adhesive is supplied without the adhesive application gun which may be purchased separately.

To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

Champion Epoxy Adhesive
Engineering

A 100% DIGITAL FACILITY THAT STRIVES TO MEET ENVIRONMENTAL AND SYSTEM MANAGEMENT REQUIREMENTS

 

  • ISO 9001 – Certified in quality management systems for over a decade
  • ISO 14001 – World’s premier environmental management certification
  • ISO 45001 – Certified occupational health and safety management systems
  • Fiberglass Conduit Epoxy Adhesive
    See how easy epoxy adhesive is to join conduit and couplings in this instructional video.
    Play video
  • field cutting
    Field Cutting
    Learn how to field cut Champion Fiberglass conduit, and how to prepare and make adhesive joints.
    Play video
  • Bonding Epoxy Conduit
    Bonding Epoxy Conduit
    Learn how to make an adhesive connection for fiberglass conduit.
    Play video
  • Red Cedar Natural Gas Gathering Plant - Durango, CO
    Below Ground

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.
    View Application
  • Bonding Phenolic Conduit
    Bonding Phenolic Conduit
    Learn how to assemble phenolic conduit sections.
    Play video
  • Photo of Pittsburgh Bridge
    Bridges

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    To use the adhesive, first prepare the conduit. Cut the end of the conduit with a diamond tip chop saw blade or portaband saw.

    Photo of how to cut the end of the conduit with a diamond tip chop saw blade or portaband saw.
    View Application

Ready to learn more? Contact us today.

Yes, I'd like to receive periodic updates about new products and applications.
This field is for validation purposes and should be left unchanged.